波多野结衣一区二区三区av免费丨少妇高潮太爽了在线视丨中文乱码在线中文字幕中文乱码丨扒开女人内裤猛进猛出免费视频丨欧美成人精品福利视频

Correct Protection Operation of Multi station Cold Heading Machine

Current location:Home  / News  / Day health information / Correct Protection Operation of Multi station Cold Heading Machine

Correct Protection Operation of Multi station Cold Heading Machine

date:[2022-08-08]     pk_hits:

The multi station cold heading machine has good surface quality and high dimensional accuracy. Because of the cold work hardening during the upsetting process, the deformation should not be too large to reduce cracks. The product has high forming power, fixed power, and electricity, and a large amount of capital contribution is made at a time. The correct protection operation of the multi station cold heading machine will be summarized by the manufacturer of Tianwei Multi station Cold Heading Machine.

Correct protection operation of multi station cold heading machine:

1. The multi station cold heading machine has been used for a long time, which will produce grease, carbon deposition, sediment and rust inside. When stepping on the pedal, the direction of the brake pedal will be very low. When stepping on the pedal, the pedal may gradually rise, but the reaction force is small, and the braking effect is poor. When the brake pedal is pressed, the air pressure is normal, but the brake pedal does not move, indicating that the piston of the brake control valve is blocked.

2. The multi station cold heading machine shall remove the brake valve and repair or replace it. The piston of the hydraulic cylinder of the booster cylinder may be blocked or the seal ring may be damaged, and then the oil volume and pressure in the output brake fluid are reduced. If the brake oil pipe is damaged or the oil pipe joint leaks, the amount and pressure of brake fluid entering the brake cylinder will be reduced. Check the brake air pressure to eliminate the defect of low brake air pressure and ensure that the brake air pressure is between 0.45 and 0.70Mpa.

3. Multi station cold heading machine When the loader steps on the brake and releases the brake pedal, all or a single wheel will brake, and the brake disc will become hot and weak, usually referred to as "brake does not return". Regularly check the connection and sealing of each part of the brake of the multi station cold heading machine.

4. When stepping on the brake pedal of multi station cold heading machine, the pedal orientation will become very low, while when stepping on the pedal continuously, the pedal will gradually rise, but the brake pedal is very weak, and the braking effect is not safe. It is the air in the braking system and needs to be eliminated. The high-pressure gas generated by the engine driven cold forging machine enters the air reservoir through the oil-water separator and air pressure regulator. When the brake pedal is depressed, the high-pressure gas enters the air brake valve from there. Participate in the air tank, and then participate in the air booster pump group. After multi pressure occurs, the cylinder pushes the afterburner. The brake fluid at the other end enters the brake caliper disc on each wheel through the oil pipe, pushes the piston to clamp the brake disc, and then brakes the wheels.

5. When the multi station cold heading machine steps down the brake pedal, the piston of the air brake valve will prevent the passage of high-pressure gas and make the gas in the valve touch the atmosphere. The afterburner pump unit returns to its position under the action of the spring force, reduces the pressure of the brake fluid in the brake pipeline, and then releases the brakes on the wheels.


Pingyang Tianwei Machinery Co., LtdFull system solutions for quality machinery manufacturers

All product pictures and publicity pictures of this website belong to us. No individual or organization is allowed to use them, and any embezzlement must be prosecuted.

Pingyang Tianwei Machinery Co., Ltd

Tel:0577-86266681Tel:0577-86125986mobile phone:13806699071E-mail:tianweimachine@126.comAdd: Haixi Industrial Park, Pingyang County, Wenzhou, Zhejiang

WeChat

Service hotline

13806699071

We warmly welcome your consultation, and we will provide you with satisfactory mechanical solutions

主站蜘蛛池模板: 国产午夜成人无码免费| 国产中文三级全黄| 四虎永久在线精品免费观看| 国产成人av片免费| 国产精品亚洲专区无码不卡| 亚洲成av人片天堂网| 无遮挡18禁啪啪免费观看| 亚洲精品无码成人片| 亚洲日韩在线观看免费视频| 插我舔内射18免费视频| 激情综合婷婷丁香五月情| 亚洲电影天堂在线国语对白| 无码 制服 丝袜 国产 另类| 中文字幕丰满孑伦无码专区| 久久精品夜夜夜夜夜久久| 国产精品情侣呻吟对白视频| 国内精品自线一区二区三区| 亚洲欧洲无卡二区视頻| 国产色诱视频在线播放网站| 乱人伦中文无码视频在线观看| 天天爽夜夜爽人人爽88| 亚洲成av人片在线观看| 少妇的丰满3中文字幕| 国产精品永久在线观看| 黑人巨大精品欧美一区二区| 暖暖视频 免费 日本社区| 国产卡一卡2卡3精品推荐| 性高朝久久久久久久久久| 亚洲成a人片在线观看日本| 人妻中文字幕在线网站| 熟妇高潮精品一区二区三区| 亚洲夂夂婷婷色拍ww47| 国产成人精品电影在线观看| 免费精品国自产拍在线播放| 无码国产精品一区二区免费i6| 久久人妻无码aⅴ毛片a片动图| 中文字幕亚洲综合久久| 久久99精品久久久久久野外| 日本大片免a费观看视频| 法国啄木乌av片在线播放| 2018高清日本一道国产-在|